Eeger Beever™ 1922 Brush Chipper

Ideal for residential tree services, vegetation management, lot and land clearing, maintenance contractors and municipalities, this chipper combines Morbark strength in a more compact design. The Eeger Beever 1922 weighs in at less than 10,000 lb (4,536 kg) (GVWR), eliminating the need for additional transport licensing requirements. (Dependent on options chosen.)

Morbark Beever M18RX Infeed

Infeed

Oversized perimeter opening with large throat opening, radius infeed walls and straight flow through infeed design increases efficiency while reducing infeed wear.

Morbark Beever M18RX Reverse Auto Feed

Reversing Auto-feed

The reversing auto-feed system automatically stops forward feed and briefly backs materials away from the drum for optimum engine performance while chipping.

General

Height:  9’4″ (2.84 m)
Width: 7’8″ (2.33 m)
Length: 18’3″ (5.56 m)


Gross weight (approximate): 9,550 – 11,500 lb (4,331—5,216 kg)
Suspension: 10,000 lb Torflex (4,535 kg)


Infeed Opening: 36″ high x 59″ wide (91.4 cm x 149.9 cm)
Throat Opening: 19″ high x 21.275″ wide (48.3 cm x 54 cm)

Drum: 23.5″ wide x 37.375″ diameter (59.69 cm x 94.93 cm)


Engine: CAT, GM or Perkins
Horsepower: 165–174 HP (123–129.8 kW)


Fuel capacity: 44 gallons (166.6 litres)
Hydraulic oil capacity: 26 gallons (98.4 litres)


Frame: 8.2 lb, 6″ channel (3.72 kg, 15.24 cm channel)

Tires: (2) 235/75×17.5

Hitch: 2.5″ Pintle (6.35 cm)


Equipment Highlights

Four dual-edged knife staggered-pocket drum with removable knife holders, dual-sided, chambered air impeller system and controllable air flow vents

Top 20.5″ (52.1 cm) wide horizontal feed wheel equipped with serrated teeth and knife bars

360° manual crank swivel discharge with adjustable height and chip deflectors

Live hydraulic system including: ball valve, pump, motor, and valve bank with additional preplumbed valve section for installation of an aftermarket winch package

4″ x 6″ (10.2 x 15.2 cm) tubular steel fixed-length drawbar and 0.375″ (1 cm) thick safety chains with clasp hooks

Enclosed engine with gauge panel, radiator fines screen and slide rails for belt adjustment


Options

  • ChipSafe® Operator Safety Shield
  • Winch package: heavy-duty, 5,000 lb (2,268) pull capacity with rope and 10′ (3 m) chafe guard
  • Custom paint and logo packages
  • Bottom Bump Bar
  • Hydraulic Swivel Discharge
  • Cone Holder
  • Spare Tire/Mount
  • Folding Infeed Tray
  • Flow Control
  • Axle Options Available
  • Strobe Light
  • Infeed Curtain
  • Pusher Paddle
  • Front and Rear Stabilizers
Specifications may vary with equipment options.
ChipSafe Operator Safety Shield

Be Safe. Get ChipSafe.

The ChipSafe® Operator Safety Shield — the latest safety innovation for Morbark Beever™ Brush Chippers.

You may also be interested in…