The TorqMax™ dual feed wheel compression system provides more than 7,500 lb/ft (10,169 Nm) of material pulling force.
Infeed
The 36" high x 59" wide (91.4 x 149.9 cm) infeed chute with 20.5" high x 31" wide (52.1 x 78.7 cm) throat opening allows for easy feeding of a variety of materials and reduces saw labor.
Reversing Auto-feed
The reversing auto-feed system automatically stops forward feed and briefly backs material away from the drum for optimum engine performance while chipping.
Hydraulic Down Pressure
The Variable Force™ Hydraulic Down Pressure System eliminates the use of springs and creates up to 10,000 lb (4,535 kg) of perpetual down pressure.
Track Undercarriage Option
Take the chipper to the material with a choice of 400mm rubber or steel tracks, 4.84 PSI (33.4 kPa) ground pressure, low-speed and high-speed travel ranges of 1.0 MPH and 1.8 MPH (1.6/2.9 km/h).
Specifications
Specifications
General
Height
9' wheeled/9'3" tracked
Width
7'8" wheeled/8'2" tracked
Length
21'8" wheeled/17'8" tracked
Gross weight (approx., single axle)
11,000 lb
Gross weight (approx., tandem axle)
12,900 - 15,000 lb
Gross weight (approx., tracked)
15,900 lb
Suspension (single axle)
(1) 12,000 lb Torsion
Suspension (tandem axle)
(2) 8,000 lb Torsion
Infeed opening (height x width)
36" x 59" wheeled/38" x 65" tracked
Throat opening (height x width)
20.5" x 31"
Drum (width x diameter)
23.8" x 37.4"
Engine
CAT, Ford, Isuzu or John Deere
Horsepower
140–275 HP
Fuel capacity
60 gallons
Hydraulic capacity
41 gallons wheeled/ 44 gallons tracked
Frame
2" x 6" Tube Steel
Tires
235/75Rx17.5
Hitch
2.5" Pintle
Optional tracks
Caterpillar 305 Undercarriage 400 mm Rubber or Steel Tracks
Tracks ground pressure
4.84 PSI
Tracks ground speed (low/high)
90 FPM/160 FPM
Maximum Chipping Capacity
19"
Videos
Videos
Eeger Beever Brush Chipper Line Equipment Features Walk-around