Power | 200- to 300-hp (149.1 kW - 223.7 kW) electric motor, 250- to 350-hp (186.4 kW - 261 kW) diesel motor |
Length | 180', 54.9 m |
Height | 76", 193 cm |
Width | 70", 177.8 cm |
Infeed Opening | 10" x 31", 25.4 cm x 78.7 cm |
Discharge Height | 5' - 15', 1.5 m - 4.6 m |
Drive System | belt & sheave drive, 8 groove |
Hydraulic Oil Tank Capacity | 25.5 gallons, 96.5 L |
Bearings | Dodge taper-lock piloted flange |
Hammers | (18) 2" (5.1 cm) wide fixed hammers with 3" (7.6 cm) wide viper inserts |
Other Features | - Double-door opening for huge access area to mill
- Two 4-groove, 5V belts to the mill
- 2-groove, 5V belt to the hydraulic pump
- 2 usable edge, replaceable anvil
- Easily removed/rotated anvil for fast replacement
- Patented variable force, constant down pressure hydraulic system with feed control
- Hammermill rods can be configured to be removed from either side
- Stacking /discharge conveyor
|
Options | - Outfeed Conveyor, consisting of:
- -- 9' (2.7 m) level, 8' (2.4 m) upright dual C188 drag chain conveyor that discharges at 6' - 15' (1.8 m - 4.6 m) height
- -- 0.2" x 1.5" x 2.5" (0.5 cm x 3.8 cm x 6.4 cm) angle iron flites on 15" (38.1 cm) center
- -- Constructed from 7 gauge steel
- -- Hydraulic direct lock drive with chain speeds up to 70' per minute (21.3 m/min)
- Infeed vibrating conveyor: 20' long x 30" wide x 10" high (6.1 m x 76.2 cm x 25.4 cm) straight sides. Conveyor formed of 0.4" (1 cm) panning and includes 10-hp (7.4 kW) electric drive
- Infeed belt conveyor: 20' long x 30" wide x 10" high (6.1 m x 76.2 cm x 25.4 cm) straight sides. Conveyor formed of 0.4" (1 cm) panning and includes smooth belt and hydraulic drive
- Additional length by foot for vibrating conveyor
- Additional length by foot for belt conveyor
- Additional length by foot for outfeed conveyor
- Hydraulic drive for infeed in lieu of electric (vibrating conveyor)
- Direct coupled motor
- Separate 25-hp (18.6 kW) motor to run hydraulic pump
|