1. Equipment that is Made for More in the Forestry, Biomass, Recycling, ROW Maintenance, Sawmill, and Tree Care markets.
  2. Dealer Login
  3. Careers

Eeger Beever™ 1415 Brush Chipper

Perfect for utility line clearing, residential tree services, rental yards and municipalities, this powerful and compact model is easy to maneuver. The Eeger Beever 1415 is also available with tracks for right of way clearing, highway clean-ups and hard to reach areas requiring a self-propelled unit for material access. The direct driven dual feed wheel system with serrated teeth and knife bar combination and end cap ripper teeth allow positive material feeding and reduced material wrapping around the feed wheel shaft for increased feeding efficiency.

Find a Dealer


The 60″ wide x 31″ (152.4 cm x 78.74 cm) high chute opening and 15″ wide x 14″ (38.1 cm x 35.56 cm) high throat opening allows for easy feeding of branchy material and reduced saw labor.

Hydra-Lift System

The Hydra-Lift™ compression system with spring-assisted down pressure aids in feeding difficult limbs.

360° Swivel Discharge

360° swivel discharge with chip deflectors puts chips right where they’re needed without removing the chipper from the tow vehicle.

Track Undercarriage Option

Take the chipper to the material with a two-speed, 72″ long x 11.5″ wide (182.9 cm x 29.2 cm), turf-friendly rubber track undercarriage and 4.95 PSI (34.1 kPa) ground pressure.

ui/arrow/rightDC122F27-E375-4897-B1AE-8B86737A9EE2Created with Sketch.
Eeger Beever Brush Chipper Line Equipment Features Walk-around

Customer Testimonial - Rogue Tree Solutions, Featuring the Eeger Beever 1415 Brush Chipper



Eeger Beever™ 1415 Brush Chipper
Height9' wheeled/8' tracked, 2.74 m wheeled/2.44 m tracked
Width6'2" wheeled/6'3" tracked, 1.9 m wheeled/1.9 m tracked
Length15'6" wheeled/13'9" tracked, 4.72 m wheeled/4.2 m tracked
Gross weight (approximate)7,000 lb wheeled/8,200 lb tracked, 3,175 kg wheeled/3,719 kg tracked
Suspension7,000 lb Torsion, 3,175 kg Torsion
Infeed opening (height x width)31" x 60", 78.7 x 152.4 cm
Throat opening (height x width)14" x 15", 35.6 x 38.1 cm
Drum (width x diameter)14.5" x 21.4", 36.8 x 54.3 cm
EngineIsuzu or PSI
Horsepower48–145 HP, 36.8–108.1 kW
Fuel capacity24.5 gallons, 92.7 L
Hydraulic capacity17 gallons, 64.4 L
Frame8.2 lb, 6" channel wheeled/2" x 4" tubular tracked, 3.7 kg, 15.2 cm channel wheeled/5.1 cm x 10.2 cm tubular tracked
Tires(2) 235/80Rx16
Hitch2.5" Pintle, 6.4 cm Pintle
Optional tracksCAT 303.5 undercarriage with 300 mm rubber tracks
Tracks ground pressure4.95 PSI, 34.1 kPa
Tracks ground speed (low/high)1.0/1.8 MPH, 1.6/2.9 km/h


Eeger Beever™ 1415 Brush Chipper
Maximum Chipping Capacity12", 30.49 cm
Find Your Local Dealer