Eeger Beever™ 1215 Brush Chipper

With its power and easily transportable design, the compact and economical Eeger Beever 1215 chipper is the ideal unit for utility line clearing, residential tree services, rental yards and municipalities. The dual-sided, chambered air impeller system increases chip-throwing velocity and reduces dust and material blowback out the infeed to pack more into the chip truck.

Infeed Opening

The 31″ high x 60″ wide (78.74 cm x 152.4 cm) chute opening and 12″ high x 15″ wide (30.48 cm x 38.1 cm) throat opening allows for easy feeding of branchy material and reduced saw labor.

M12RX Feel Wheel Drive Chain Guard

Feed Wheel

TorqMax Top Feed Wheel Compression system with spring-assisted down pressure generates more than 3,200 lb./ft. (10,500 lb./m.) of material pulling force.

M12RX Discharge

New-Style Discharge

360° swivel discharge with chip deflectors puts chips right where they’re needed without removing the Beever from the tow.


Height: 9′ (2.74 m)
Width: 5’11” (1.8 m)
Length: 15’4″ (4.67 m)

Gross weight (approximate): 4,900 lb (2,223 kg)
Suspension: 7,000 lb (3,175 kg) Torflex

Infeed opening: 31″ high x 60″ wide (78.74 cm x 152.4 cm)
Throat opening: 12″ high x 15″ wide (30.48 cm x 38.1 cm)

Drum: 14.25″ wide x 21.375″ diameter (36.8 cm x 54.3 cm)

Engine: CAT, Perkins, or PSI
Horsepower: 49–89 HP (36.5—66.4 kW)

Fuel capacity: 24.5 gallons (92.7 litre)
Hydraulic capacity: 17 gallons (64.4 litre)

Frame: 8.2 lb, 6″ channel (3.7 kg, 15.2 cm channel)

Tires: (2) 235/80Rx16

Hitch: 2.5″ Pintle (6.35 cm)

Equipment Highlights

14.25″ wide x 21.375″ diameter (36.2 cm x 54.3 cm) staggered-knife-pocket drum with two dual-edged chipper knives and dual-sided chambered air impeller system

Reversing automatic feed system

Enclosed engine with gauge panel, radiator fines screen and slide rails for belt adjustment

Fuel tank gauge and shut-off valve

Hydraulic tank shut-off valve, drain plug, sight gauge and clean-out cover

Live hydraulics; ball valve, pump, motor and control valve

Tube and support pad to mechanically raise and lower feed wheel using the drawbar jack

5″ x 3″ (12.7 cm x 7.62 cm) tubular steel telescoping drawbar with two 12″ (30.48 cm) extensions


  • ChipSafe® Operator Safety Shield
  • Bottom Bump Bar
  • Cone Holder
  • Chocks/Chock Holder
  • Folding Infeed Tray
  • Custom Paint and Logo Packages
  • Spare Tire and Mount
  • Strobe Light
  • Pusher Paddle
  • Infeed Curtain
  • Rear Jacks
Specifications may vary with equipment options.
Morbark Knives

Morbark Knives: High Performance. Higher Value.

Morbark knives give you:

  • Morbark Durability
  • Improved Quality
  • Better Value
You may also be interested in…