MXD52 Stump Grinder

The MXD52 Stump Grinder will save you time and money. Two-speed ground travel reaches speeds up to 290 FPM/5.31 kph, getting you to the stump faster, and a 52″/132.08 cm boom arc means less positioning at the stump. Long Boom Technology maintains full boom arc swing regardless of cutting depth; piloted flange bearings increase bearing life and minimize exposure to dirt and debris; and an articulating front axle maintains stability on uneven terrain. Other standard features include 4.6-cubic-inch hydrostatic motor; and electronic toggled control panel functions. Wireless remote control with tethered back-up system, 4 x 4 drive system and spring-loaded Clic™ Dual package are optional.

MXD52 Long Boom

Long Boom Technology

Long Boom Technology allows maximum swing above and below grade to access hard-to-reach areas while maintaining full boom arc swing regardless of cutting depth.

MXD52 Hydro Drive

Hydrostatic Drive

Hydrostatic primary drive with belt final drive provides efficient (90% power transfer) transfer of power between drive and cutting system with minimal moving components

MXD52 Boom Pivot

Boom Pivot Assembly

Heavy-duty boom pivot significantly reduces wear in critical area of the stump grinder to provide years of trouble-free service and allows for greater boom arm swing radius.

Articulating Front Axle

The articulating front axle maintains stability on uneven terrain.

General

Length: 11’5″/3.48 m
Width (w/o dual wheels): 35″/88.9 cm
Height: 5’3″/1.6 m
Weight: 2,720 lbs./1,234 kg


Engine: CAT or Perkins Diesel
Horsepower: 34–62 HP/25–46 kW


Fuel capacity: 11 gallons/41.64 L
Hydraulic oil capacity: 12 gallons/45.42 L


Boom arc swing: 52″/132.08 cm
Maximum cutting height: 24″/61 cm
Maximum cutting depth: 16″/40.64 cm


Tires: (4) 5.70-8/(4) 14.48 cm-20.32 cm

Primary drive: Hydrostatic
Secondary drive: Poly Belt

Cutter wheel speed: 1,200 RPM


Equipment Highlights

Two-speed ground travel from 0-3.3 MPH/0-5.31 KPH with (2) 24ci hydraulic drive motors

1 ¾”/4.44 mm diameter piloted flange cutter head bearings increase bearing life and minimize exposure to dirt and debris

Operator’s console complete with 5-up manifold configuration, electric over hydraulic valves and weather-resistant electronic toggles controlling the cutter head functions, throttle functions, high/low travel speed functions and remote on/off functions

Conventional cutting system with with Greenteeth® hardware

3″/7.62 cm square x ¼”/6.35 mm thick tubular steel “I” frame construction

More than 11 cubic feet of chip retention with bolt-on chip containment curtain

Unit pre-plumbed for easy installation of plow assembly

Dual Wheel Package with spring-loaded Clic™ duals

The Morbark Paint System is a Super-Shield® topcoat and two-component, high-performance, isocyanate-free, urethane system.  The topcoat is high-solids, low-VOC, and offers long-term color and UV protections, as well as resistance to a wide range of chemicals, pollutants, and natural weathering. The system utilizes automotive grade pigments in the Super-Shield topcoat to achieve outstanding color and gloss protection.  The system has also been tested to meet many military-grade standards for long-term performance. (Super-Shield is a registered trademark of Cloverdale Paint Inc.)


Options

  • 4 x 4 drive system with independent hydraulic drive motors
  • Hydraulic back-fill blade
  • Fold-away boom-mounted deflect curtain assembly
  • Wireless Remote Control with tethered back-up
  • Custom paint and logo packages
Specifications may vary with equipment options.

The Morbark Wearwolf™ Insert rips through palm, hardwood, frozen and soft woods, anything you can feed it.

You may also be interested in…