Model 30 Chiparvestor Whole Tree Chipper

The largest in the line, the Morbark Model 30 Chiparvestor is designed for power! This aggressive machine features a chipper disc that is 5″ (12.7 cm) thick and weighs 8,000 lbs. (3,628.74 kg), making it perfect for the toughest of jobs. With an 83″ (210.82 cm) disc and a four-wheel hydraulic feed wheel compression system, this machine is fully equipped to handle what you give it. Customizable options include a three- or four-knife chipper disc, tri-axle, reversing fan, track option and many more, making it ideal for any of your needs. Increase your efficiency with the optional cab and loader, which boasts a lift capacity of 20,000 lbs. (9,071.85 kg) at 10′ (3.05 m). With the optional Strickland SS40 undercarriage, the Morbark 30 WCL Track can traverse the roughest terrain.

Chipper Disc

Chipper Disc

Each disc is fabricated from plate steel and put through ultrasonic testing. Material certification is issued for each disc, which provides the best chipper disc in the industry.

Morbark Integrated Control Systems

This ultimate diagnostic system monitors pressures, temperatures, clutch systems and engine efficiency to maximize performance.

Chip Quality

Units produce quality chips even in non-merchantable and juvenile timber.

Model 30 Track WCL Feed System

Feed System

Powerful multi-wheel feed system provides positive feed of logs and tops for excellent chip quality.

Model 30 Chiparvestor - Cab closeup

Operator’s Cab: Optional

Roomy, climate-controlled cabs are equipped with comfortable seats, joystick controls and full instrumentation.

General

Chipping capacity: 30″ (76.2 cm)
Length: 32′ (9.75 m)
Height: 13’4″ (4.06 m)
Width: 10’4″ (3.15 m)
Gross weight (approx.): 58,000 lbs. (26,308 kg)
Horsepower: up to 1,050 HP (782.98 kW)
Engine: CAT
Tandem axle trailer: 50,000 lb. (22,679 kg) suspension
Fuel capacity (tank): 300 gal (1,135.62 L)
Hydraulic oil capacity: 200 gal (757.08 L)
Knives (3): 23″ x 5″ x ½” (58.42 cm x 12.7 cm x 1.27 cm)
Chip sizes: 5/8″, ¾”, 7/8″, 1″, 1 ¼”, 2″ (15.88 mm, 19 mm, 22.22 mm, 25.4 mm, 31.75 mm, 50.8 mm)


Equipment Highlights

  • 83″ (210.82 cm) diameter x 5″ (12.7 cm) thick three-knife chipper disc with LH rotation
  • Hydraulic chipper hood for easy knife access
  • 30″ (76.2 cm) x 10′ (3.05 m) CAT chain infeed bed
  • Four-wheel hydraulic feed system
  • Two 13″ (33 cm) x 25 ¾” (65.4 cm) side feed wheels and one 22 ¼” (56.52 cm) x 68″ (172.72 cm) top feed wheel
  • Dirt separator with deflector
  • Hydraulic swivel/telescoping discharge spout
  • Reversing fan

Options

  • PT Tech hydraulic clutch
  • Four-knife chipper disc
  • Espar heating system for cold-weather start
  • Electric power
  • Light package
  • 11-HP (8.2 kW) air compressor
Specifications may vary with equipment options.

General

Chipping capacity: 30″ (76.2 cm)
Length: 41′ (12.5 m)
Height: 13’6″ (4.11 m)
Width: 11′ (3.35 m)
Gross weight (approx.): 82,000 lbs. (37,195 kg)
Horsepower: up to 1,200 HP (894.84 kW)
Engine: CAT
Tandem axle trailer: 50,000 lb. (22,679 kg) suspension
Fuel capacity (tank): 400 gal (1,514.16 L)
Hydraulic oil capacity: 300 gallons (1,135.62 L)
Knives (3): 23″ x 5″ x ½” (58.42 cm x 12.7 cm x 1.27 cm)
Chip sizes: 5/8″, ¾”, 7/8″, 1″, 1 ¼”, 2″ (15.88 mm, 19 mm, 22.22 mm, 25.4 mm, 31.75 mm, 50.8 mm)


Equipment Highlights

  • 83″ (210.82 cm) diameter x 5″ (12.7 cm) thick three-knife chipper disc with LH rotation
  • Hydraulic chipper hood for easy knife access
  • 30″ (76.2 cm) x 10′ (3.05 m) CAT chain infeed bed
  • Three-wheel hydraulic feed system
  • Two 13″ (33 cm) x 25 ¾” (65.4 cm) side feed wheels and one 22 ¼” (56.52 cm) x 68″ (172.72 cm) top feed wheel
  • Wireless remote control with tethered back-up
  • Enclosed weatherized operator’s cab is mounted on rubber shock absorbers and tilts hydraulically for transport and includes combination air conditioner/heater and six-way adjustable seat and joystick controls
  • Morbark 1000 knuckleboom loader, 25′ (7.62 m)reach, 210º swing and by-pass grapple, with lift capacity of 20,000 lbs. (9,071.85 kg) at 10′ (3.05 m)
  • Dirt separator with deflector
  • Hydraulic swivel/telescoping discharge spout
  • Reversing fan

Options

  • PT Tech hydraulic clutch
  • Four-knife chipper disc
  • Espar heating system for cold-weather start
  • Electric power
  • Light package
  • 11-HP (8.2 kW) air compressor
Specifications may vary with equipment options.

General

Chipping capacity: 30″ (76.2 cm)
Length: 32’11” (10 m)
Height: 11’11” (3.63 m)
Width: 11’10” (3.61 m)
Gross weight  (approx.): 94,000 lbs. (42,638 kg)
Horsepower: up to 1,200 HP (894.84 kW)
Engine: CAT
Fuel capacity (tank): 400 gal (1,514.16 L)
Hydraulic oil capacity: 300 gallons (1,135.62 L)
Knives (3): 23″ x 5″ x ½” (58.42 cm x 12.7 cm x 1.27 cm)
Chip sizes: 5/8″, ¾”, 7/8″, 1″, 1 ¼”, 2″ (15.88 mm, 19 mm, 22.22 mm, 25.4 mm, 31.75 mm, 50.8 mm)


Equipment Highlights

  • 83″ (210.82 cm) diameter x 5″ (12.7 cm) thick three-knife chipper disc with LH rotation
  • Hydraulic chipper hood for easy knife access
  • Four-wheel hydraulic feed wheel compression system
  • Heavy-duty feed works drive
  • Electric warning horns activated from cab and/or ground position on both sides of machine
  • Enclosed weatherized operator’s cab lowers hydraulically for transport and includes combination air conditioner/heater and six-way adjustable seat and joystick controls
  • Morbark 500 knuckleboom loader, 23′ (7 m) reach, 180º swing and by-pass grapple, lift capacity of 17,200 lbs. (6,894.6 kg) at 10′ (3.05 m)
  • Reversing Fan

Options

  • Air Compressor
  • Halogen light package
  • ESPAR heating system for cold-weather start
  • 270º hydraulic powered swivel end discharge spout
  • CAT 330L undercarriage with 700mm triple grouser pads with ground clearance of 20″(50.8 cm)
  • Infeed extension to hydraulic fold up 90º for transport
Specifications may vary with equipment options.
Bevel Buddy™ makes chipping more profitable

Bevel Buddy™ makes chipping more profitable

Re-sharpen knives without removing from machine for less downtime and more production!

You may also be interested in…