Eeger Beever™ 2131 Brush Chipper

With its large capacity and high-production volume reduction capabilities, this chipper is perfect for residential tree services, vegetation management, lot and land clearing, maintenance contractors and municipalities. The Eeger Beever 2131 boasts a huge list of options to customize the machine as well as more standard features than any other chipper in its class. The 2131 is also available tracked for right of way clearing, highway cleanups and hard‑to-reach areas requiring a self‑propelled unit for material access. An optional loader also is available.

Beever M18R infeed

TorqMax™ Feed Wheel

The TorqMax™ dual feed wheel compression system provides more than 7,500 lb/ft (10,169 Nm) of material pulling force.

Morbark Beever M18R Infeed working


The 36″ high x 59″ wide (91.4 cm x 149.9 cm) infeed chute with 20.5″ high x 31″ wide (52.1 cm x 78.7 cm) throat opening allows for easy feeding of a variety of materials and reduces saw labor.

Morbark Beever M18RX Reverse Auto Feed

Reversing Auto-feed

The reversing auto-feed system automatically stops forward feed and briefly backs material away from the drum for optimum engine performance while chipping.

Beever M18R Hydraulic Down Pressure

Hydraulic Down Pressure

The Variable Force™ Hydraulic Down Pressure System eliminates the use of springs and creates up to 10,000 lb (4,535 kg) of perpetual down pressure.


Height:  9’6″ (2.89 m)
Width: 7’7″ (2.31 m)
Length: 21’2″ (6.54 m)

Gross weight (approx., single axle): 11,000 lb (4,990 kg)
Gross weight (approximate, tandem axle):  12,200 lb (5,535 kg)
Suspension: Single Axle: (1) 10,000 lb Torflex (4,536 kg)
Suspension: Tandem Axle: (2) 8,000 lb Torflex (3,629 kg)

Infeed Opening: 36″ high x 59″ wide (91.4 cm x 149.9 cm)
Throat Opening: 20.5″ high x 31″ wide (52.1 cm x 78.7 cm)

Drum: 23.5″ wide x 37.375″ diameter (56.69 cm x 94.93 cm)

Engine: CAT, GM or Perkins
Horsepower: 147– 275 HP (109.6—205 kW)

Fuel capacity: 60 gallons (227.1 litres)
Hydraulic oil capacity: 41 gallons (155.2 litres)

Frame: 2″ x 6″ tubular (5.08 cm x 15.24 cm)

Tires: 235/75Rx17.5

Hitch: 2.5″ Pintle Ring (6.35 cm)

Equipment Highlights

23.5″ wide (59.7 cm) x 37.375″ (94.9 cm) diameter, four dual-edged knife staggered-pocket drum with removable knife holders, dual-sided, chambered air impeller system and controllable air flow vents

Dual horizontal feed wheels with TorqMax™ top feed wheel compression system, hydraulic lift assist and Variable Force™ constant hydraulic down pressure system with additional manually applied hydraulic down pressure at the valve handle

Live hydraulic system including: ball valve, pump, motor, and valve bank with additional preplumbed valve section for installation of an aftermarket winch package

360° manual height-adjustable discharge

Direct-drive bottom feed wheel


  • ChipSafe® Operator Safety Shield
  • Winch Package: heavy-duty, 5,000 lb (2268 kg) pull capacity with rope and 10′ (3 m) chafe guard
  • Custom Paint and Logo Packages
  • Bottom Bump Bar
  • Hydraulic Swivel Discharge
  • Cone Holder
  • Spare Tire and Mount
  • Folding Infeed Tray
  • Flow Control
  • Axle Options Available
  • Infeed Curtain
  • Strobe Light
  • Pusher Paddle
  • Front and Rear Stabilizers
Specifications may vary with equipment options.
ChipSafe Operator Safety Shield

Be Safe. Get ChipSafe.

The ChipSafe® Operator Safety Shield — the latest safety innovation for Morbark Beever™ Brush Chippers.

You may also be interested in…