Eeger Beever™ 1415 Brush Chipper

Perfect for utility line clearing, residential tree services, rental yards and municipalities, this powerful and compact model is easy to maneuver. The Eeger Beever 1415 is also available with tracks for right of way clearing, highway clean-ups and hard to reach areas requiring a self-propelled unit for material access. The direct driven dual feed wheel system with serrated teeth and knife bar combination and end cap ripper teeth allow positive material feeding and reduced material wrapping around the feed wheel shaft for increased feeding efficiency.

Infeed Opening

The 31″ high x 60″ wide x (78.74 cm x 152.4 cm) chute opening and 14″ high x 15″ wide (35.56 cm x 38.1 cm) high throat opening allows for easy feeding of branchy material and reduced saw labor.

Beever M12R HydraLift

Hydra-Lift System

The powerful Hydra-Lift™ dual feed wheel compression system with spring-assisted down pressure generates more than 3,300 lb/ft (4,474 Nm) of combined material pulling force.

360° Swivel Discharge

360° swivel discharge with chip deflectors puts chips right where they’re needed without removing the chipper from the tow vehicle.

Track Undercarriage: Optional

Take the chipper to the material with a two-speed, 72″ long x 11″ wide (182.88 cm x 27.94 cm), turf-friendly rubber track undercarriage and 3.31 PSI ground pressure.

General

Length: 15’5″ wheeled (4.7 m)/13’9″ tracked (4.19 m)
Height: 8’5″ wheeled (2.56 m)/8′ tracked (2.44 m)
Width: 5’11” wheeled (1.8 m)/6’3″ tracked (1.90 m)


Gross weight (approximate): 5,500 lb wheeled (2,495 kg)/ 6,400 lb (2,903 kg) tracked
Suspension: 7,000 lb Torflex (3,175 kg)


Infeed opening: 31″ high x 60″ wide (78.74 cm x 152.4 cm)
Throat opening: 14″ high x 15″ wide (35.56 cm x 38.1 cm)

Drum: 14.5″ wide x 21.375″ diameter (36.83 cm x 54.29 cm)


Engine: CAT, Perkins or PSI
Horsepower: 49–145 HP (36.5—108.1 kW)


Fuel capacity (tank): 24.5 gallons (92.7 litre)
Hydraulic oil capacity: 17 gallons (64.4 litre)


Frame: 8.2 lb, 6″ channel (3.7 kg, 15.2 cm channel)

Tires:  (2) 235/80Rx16

Hitch: 2.5″ Pintle Ring (6.35 cm)


Equipment Highlights

14.5″ wide x 21.375″ diameter (36.83 cm x 54.29 cm) diameter staggered-knife-pocket drum with two dual-edged chipper knives and dual-sided chambered air impeller systems

Top and bottom horizontal feed wheels equipped with serrated teeth and knife bars

Reversing automatic feed system

Enclosed engine with gauge panel, radiator fines screen and slide rails for belt adjustment

Fuel tank sight gauge, drain plug and shutoff valve

Hydraulic tank shut-off valve, drain plug and clean-out cover

Live hydraulics; ball valve, pump, motor and control valve

3″ x 5″ (7.62 cm x 12.7 cm) tubular steel telescoping drawbar with two 12″ extensions


Options

  • ChipSafe® Operator Safety Shield
  • Folding infeed tray
  • Winch package: heavy-duty, 5,000 lb (2,268 kg) pull capacity with rope and 10′ chafe guard
  • Custom paint and logo packages
  • Bottom Bump Bar
  • Hydraulic Swivel Discharge
  • Cone Holder
  • Flow Control
  • Axle Options Available
  • Spare Tire and Mount
  • Strobe Light
  • Pusher Paddle
  • Infeed Curtain
  • Rear Jacks
Specifications may vary with equipment options.
Morbark Knives

Morbark Knives: High Performance. Higher Value.

Morbark knives give you:

  • Morbark Durability
  • Improved Quality
  • Better Value
You may also be interested in…