Beever™ M18RX Brush Chipper

While retaining an 18″ (45.72 cm) chipping capacity, the Beever M18RX Brush Chipper weighs in at less than 10,000 lbs. (4,535 kg) (GVWR), eliminating the need for additional transport licensing requirements (dependent on options chosen). Infeed is made with 7-gauge (5 mm), XF-100 sides and 3/8″ (10 mm) thick, XF-100 floor to increase material tensile strength with lighter weight components.

Ideal for residential tree services, vegetation management, lot and land clearing, maintenance contractors and municipalities, this chipper combines Morbark strength in a more compact design.

Like all Morbark equipment, the M18RX is a long-lasting, durable machine backed by a world-class parts and service support team.

Morbark Beever M18RX Infeed

Infeed

Oversized perimeter opening with large throat opening, radius infeed walls and straight flow through infeed design increases efficiency while reducing infeed wear.

Morbark Beever M18RX Pivot Assembly

Pivot Assembly

Bearing-style yoke pivot assembly with TorqMax™ drive and Variable Force™ down pressure system increases down pressure efficiency by 25%.

Morbark Beever M18RX Reverse Auto Feed

Reversing Auto-feed

The reversing auto-feed system automatically stops forward feed and briefly backs materials away from the drum for optimum engine performance while chipping.

Beever M20R fluid tanks

Separate Fluid Tanks

7-gauge split fuel and hydraulic reservoirs with shut-off valves reduce risks of vibration damage and cross-contamination while allowing for easy maintenance.

General

Chipping capacity: 18″ (45.72 cm)

Height:  9’4″ (2.84 m)
Width: 7’8″ (2.33 m)
Length (Transport): 18’3″ (5.56 m)


Gross weight (approximate): 9,550 – 11,500 lbs. (4,331—5,216 kg)
Suspension: 10,000 lb. Torflex (4,535 kg)


Infeed Opening: 65″ wide x 38″ high (165.1 cm x 96.52 cm)
Throat Opening: 21 ¼” wide x 19″ high (53.97 cm x 48.26 cm)

Drum: 23 ½” wide x 37 ½” diameter (59.69 cm x 94.93 cm)


Engine: CAT, Perkins, or GM
Horsepower: 130–174 HP (109—129 kW)


 

Fuel capacity: 44 gallons (166 litre)
Hydraulic oil capacity: 26 gallons (98 litre)


Frame: 8.2 lb., 6″ channel (3.72 kg., 15.24 cm channel)

Tires: (2) 235/75×17 ½”

Hitch: 2 ½” Pintle (6.35 cm)


Equipment Highlights

Four dual-edged knife staggered-pocket drum with removable knife holders

Vortex chambered air impeller system and controllable air flow vents

Top 20 ½” (52.07 cm) wide horizontal feed wheel equipped with serrated teeth and knife bars

360° manual crank swivel discharge with adjustable height and chip deflectors

Live hydraulic system including: ball valve, pump, motor, and valve bank with additional pre-plumbed valve section for installation of an aftermarket winch package

4″ x 6″ (10.16 cm x 15.24 cm) tubular steel fixed-length drawbar and 3/8″ thick safety chains with clasp hooks

Enclosed engine with gauge panel, radiator fines screen and slide rails for belt adjustment

The Morbark Paint System is a Super-Shield® topcoat and two-component, high-performance, isocyanate-free, urethane system.  The topcoat is high-solids, low-VOC, and offers long-term color and UV protections, as well as resistance to a wide range of chemicals, pollutants, and natural weathering. The system utilizes automotive grade pigments in the Super-Shield topcoat to achieve outstanding color and gloss protection.  The system has also been tested to meet many military-grade standards for long-term performance. (Super-Shield is a registered trademark of Cloverdale Paint Inc.)


Options

  • ChipSafe® Operator Safety Shield
  • Winch package: heavy-duty, 5,000 lb. (2,268) pull capacity with rope and 10′ chafe guard
  • Custom paint and logo packages
  • Bottom Bump Bar
  • Hydraulic Swivel Discharge
  • Cone Holder
  • Spare Tire/Mount
  • Folding Infeed Tray
  • Flow Control
  • Axle, Fender and Battery Box Options Available
Specifications may vary with equipment options.

Maintenance Made Easy

Morbark’s easy-to-follow videos answer some of the most common maintenance questions for our Beever™ brush chippers.

You may also be interested in…