Beever™ M15RX Brush Chipper

Beever M15RX Brush Chipper is ideal unit for residential tree services, utility line clearing, vegetation management, maintenance contractors and municipalities, this high-capacity chipper is now on a compact, lighter weight design platform. The 8.2 lb., 6″ (3.72 kg., 15.24 cm channel) channel frame rails increases structural strength while maintaining low unit weight.

With the powerful TorqMax™ top feed wheel compression system — the 32.3ci hydraulic motor generates more than 3,400 lb./ft. (7,530 kg/m) of material pulling force — and 18″ (45.72 cm) diameter single top feed wheel with straight flow-through infeed design, the M15RX provides powerful and efficient chipping action.

Hydra-Lift top feed wheel compression system with spring-assisted down pressure provides more than 1,500 lbs. (680 kg) of material crushing power.

The patented chambered air impeller system increases chip throwing velocity and reduces dust and material blowback out the infeed to pack more into the chip truck.

Like all Morbark equipment, the M15RX is a long-lasting, durable machine backed by a world-class parts and service support team.

Morbark Beever M14R TorqMax

TorqMax™ Feed System

The powerful TorqMax™ top feed wheel compression system generates more than 3,400 lb./ft. of material pulling force.

Infeed System

The wide infeed opening with 18″ diameter single top feed wheel and straight flow-through infeed easily climbs over material, reduces drag and increases chipping efficiency.

Beever M14R Channel Fram

Channel Frame

The 8.2 lb., 6″ channel frame rails with 2″ x 6″ tubular steel frame with cross bracing increases structural strength while maintaining low unit weight.

360° Swivel Discharge

360° manual crank swivel discharge with adjustable height puts chips right where they’re needed without removing the Beever from the tow vehicle.


Chipping capacity: 15″ (38.1 cm)

Height: 8’10” (2.69 m)
Width:  6’11” (2.11 m)
Length: 16’5″ (5 m)

Weight (approximate): 7,200 lbs. (3,265 kg)
Suspension: 7,000 lb. Torflex (3,175 kg)

Infeed opening: 55 ½” wide x 34″ high (139.7 cm x 86.36 cm)
Throat opening: 20 ½” wide x 16″ high (52.07 cm x 40.64 cm)
Drum: 23 ¾” wide x 21 3/8″ diameter (60.32 cm x 54.29 cm)

Engine: CAT, Perkins, or GM
Horsepower: 122.5–147 HP (91—109 kW)

Fuel capacity (tank): 32 gallons (121 litre)
Hydraulic oil capacity: 13 gallons (49 litre)

Frame: 8.2 lb., 6″ channel (3.72 kg., 15.24 cm channel)

Tires: (2) 215/75Rx17 ½”

Hitch: 2 ½” Pintle Ring (6.35 cm)

Equipment Highlights

23 ¾” wide x 21 3/8″ (60.32 cm x 54.29 cm) diameter staggered-knife pocket drum with two dual-edged chipper knives and dual-sided, chambered air impeller systems

Single (top) horizontal feed wheel with TorqMax top feed wheel compression system, hydraulic lift assist, spring assisted down pressure and manually applied hydraulic down pressure at the valve handle

Reversing automatic feed system

Enclosed engine with gauge panel, radiator fines screen and slide rails for belt adjustment

Fuel tank sight gauge, drain plug and shutoff valve

Hydraulic tank shut-off valve, drain plug and clean-out cover

The Morbark Paint System is a Super-Shield® topcoat and two-component, high-performance, isocyanate-free, urethane system.  The topcoat is high-solids, low-VOC, and offers long-term color and UV protections, as well as resistance to a wide range of chemicals, pollutants, and natural weathering. The system utilizes automotive grade pigments in the Super-Shield topcoat to achieve outstanding color and gloss protection.  The system has also been tested to meet many military-grade standards for long-term performance. (Super-Shield is a registered trademark of Cloverdale Paint Inc.)


  • ChipSafe® Operator Safety Shield
  • Winch package: heavy-duty, 5,000 lb. (2,268 kg) pull capacity with rope and 10′ chafe guard
  • Custom paint and logo packages
  • Bottom Bump Bar
  • Hydraulic Swivel Discharge
  • Cone Holder
  • Spare Tire/Mount
  • Folding Infeed Tray
  • Bottom Feedwheel
  • Flow Control
  • Axle, Fender and Battery Box Options Available
Specifications may vary with equipment options.
Bevel Buddy™ makes chipping more profitable

Bevel Buddy™ makes chipping more profitable

Re-sharpen knives without removing from machine for less downtime and more production!

You may also be interested in…