With its power and easily transportable design, the compact and economical Beever M12RX chipper is the ideal unit for utility line clearing, residential tree services, rental yards and municipalities.
The dual-sided, chambered air impeller system increases chip-throwing velocity and reduces dust and material blowback out the infeed to pack more into the chip truck.
The 18″ diameter single top feed wheel easily climbs over material, reduces drag and increases chipping efficiency.
Like all Morbark equipment, the M12RX is a long-lasting, durable machine backed by a world-class parts and service support team.
The 60″ wide x 31″ (152.4 cm x 78.74 cm) high chute opening and 15″ wide x 12″ (38.1 cm x 30.48 cm) high throat opening allows for easy feeding of branchy material and reduced saw labor.
Drive Belt Cover
Drive belt inspection cover provides easy access for drive system maintenance.
TorqMax Top Feed Wheel Compression system with spring-assisted down pressure generates more than 3,200 lb./ft. (10,500 lb./m.) of material pulling force.
360° swivel discharge with chip deflectors puts chips right where they’re needed without removing the Beever from the tow.
Chipping capacity: 12″ (30.48 cm)
Height: 9′ (2.74 m)
Width: 5’11” (1.8 m)
Length: 15’4″ (4.67 m)
Gross weight (approximate): 4,900 lbs. (2,225 kg)
Suspension: 6,000 lb. torsion (2,725 kg)
Infeed opening: 60″ wide x 31″ high (152.4 cm x 78.74 cm)
Throat opening: 15″ wide x 12″ high (38.1 cm x 30.48 cm)
Drum: 14 ¼” wide x 21 3/8″ diameter (36.19 cm x 54.29 cm)
Engine: CAT, Perkins, or GM
Horsepower: 49–89 HP (36—66 kW)
Fuel capacity: 24 ½ gallons (92 litre)
Hydraulic capacity: 17 gallons (64 litre)
Frame: 8.2 lb., 6″ channel
Tires: (2) 235/80Rx16″
Hitch: 2 ½” Pintle (6.35 cm)
21 3/8″ diameter x 14 ¼” (54.29 cm x 36.19 cm) wide staggered-knife-pocket drum with two dual-edged chipper knives and dual-sided chambered air impeller system
Reversing automatic feed system
Enclosed engine with gauge panel, radiator fines screen and slide rails for belt adjustment
Fuel tank sight gauge and drain plug
Hydraulic tank shut-off valve, drain plug and clean-out cover
Live hydraulics; ball valve, pump, motor and control valve
Tube and support pad to mechanically raise and lower feed wheel using the drawbar jack
5″ x 3″ (12.7 cm x 7.62 cm) tubular steel telescoping drawbar with two 12″ (30.48 cm) extensions
The Morbark Paint System is a Super-Shield® topcoat and two-component, high-performance, isocyanate-free, urethane system. The topcoat is high-solids, low-VOC, and offers long-term color and UV protections, as well as resistance to a wide range of chemicals, pollutants, and natural weathering. The system utilizes automotive grade pigments in the Super-Shield topcoat to achieve outstanding color and gloss protection. The system has also been tested to meet many military-grade standards for long-term performance. (Super-Shield is a registered trademark of Cloverdale Paint Inc.)
- ChipSafe® Operator Safety Shield
- Bottom Bump Bar