Beever™ M12R Brush Chipper

Perfect for utility line clearing, residential tree services, rental yards and municipalities, this powerful and compact model is easy to maneuver. The Beever M12R Brush Chipper is also available tracked for right of way clearing, highway clean-ups and hard-to-reach areas requiring a self-propelled unit for material access.

The patented chambered air impeller system increases chip throwing velocity and reduces dust and material blowback out the infeed to pack more into the chip truck.

The direct driven dual feed wheel system with serrated teeth and knife bar combination and end cap ripper teeth allow positive material feeding and reduced material wrapping around the feed wheel shaft for increased feeding efficiency.

The M12R is available in a PTO unit for those who have access to a commercial tractor.

Like all Morbark equipment, the M12R is a long-lasting, durable machine backed by a world-class parts and service support team.

 

Infeed Opening

The 60″ wide x 31″ (152.4 cm x 78.74 cm) high chute opening and 15″ wide x 14″ (38.1 cm x 35.56 cm) high throat opening allows for easy feeding of branchy material and reduced saw labor.

Beever M12R Drive Belt Cover

Drive Belt Cover

Drive belt inspection cover provides easy access for drive system maintenance.

Beever M12R HydraLift

Hydra-Lift System

The powerful Hydra-Lift™ dual feed wheel compression system with spring-assisted down pressure generates more than 3,300 lb./ft. (10,825 lb./m.) of combined material pulling force.

360° Swivel Discharge

360° swivel discharge with chip deflectors puts chips right where they’re needed without removing the chipper from the tow vehicle.

Track Undercarriage: Optional

Take the chipper to the material with a two-speed, 72″ long x 11″ wide (182.88 cm x 27.94 cm), turf-friendly rubber track undercarriage and 3.31 PSI ground pressure.

General

Chipping Capacity: 12″ (30.48 cm)

Length: 15’5″ wheeled (4.7 m)/13’9″ tracked (4.19 m)
Height: 8’5″ wheeled (2.56 m)/8′ tracked (2.44 m)
Width: 5’11” wheeled (1.8 m)/6’3″ tracked (1.90 m)


Gross weight (approximate): 5,500 lbs. wheeled (2,495 kg)/ 6,400 lbs. (2,903 kg) tracked
Suspension: 6,000 lb. Torflex (2,720 kg)


Infeed opening: 60″ wide x 31″ high (152.4 cm x 78.74 cm)
Throat opening: 15″ wide x 14″ high (38.1 cm x 35.56 cm)

Drum: 14 ½” wide x 21 3/8″ diameter (36.83 cm x 54.29 cm)


Engine: CAT, GM, John Deere, Kubota or Perkins
Horsepower: 49–130 HP (36—97 kW)


Fuel capacity (tank): 24 ½ gallons (90 litre)
Hydraulic oil capacity: 17 gallons (64 litre)


Frame: 8.2 lb. 6″ channel or 2″ x 4″ tubular

Tires:  (2) 235/80Rx16″

Hitch: 2 ½” Pintle Ring (6.35 cm)


Equipment Highlights

14 ½” wide x 21″ (36.83 cm x 54.29 cm) diameter staggered-knife-pocket drum with two dual-edged chipper knives and dual-sided chambered air impeller systems

Top and bottom horizontal feed wheels equipped with serrated teeth and knife bars

Reversing automatic feed system

Enclosed engine with gauge panel, radiator fines screen and slide rails for belt adjustment

Fuel tank sight gauge, drain plug and shutoff valve

Hydraulic tank shut-off valve, drain plug and clean-out cover

Live hydraulics; ball valve, pump, motor and control valve

3″ x 5″ (7.62 cm x 12.7 cm) tubular steel telescoping drawbar with two 12″ extensions

The Morbark Paint System is a Super-Shield® topcoat and two-component, high-performance, isocyanate-free, urethane system.  The topcoat is high-solids, low-VOC, and offers long-term color and UV protections, as well as resistance to a wide range of chemicals, pollutants, and natural weathering. The system utilizes automotive grade pigments in the Super-Shield topcoat to achieve outstanding color and gloss protection.  The system has also been tested to meet many military-grade standards for long-term performance. (Super-Shield is a registered trademark of Cloverdale Paint Inc.)


Options

  • ChipSafe® Operator Safety Shield
  • Folding infeed tray
  • Winch package: heavy-duty, 5,000 lb. (2,268 kg) pull capacity with rope and 10′ chafe guard
  • Custom paint and logo packages
  • Bottom Bump Bar
  • Hydraulic Swivel Discharge
  • Cone Holder
  • Flow Control
  • Axle Options Available
  • Fender Options Available
  • Battery Box Options Available
Specifications may vary with equipment options.